Add Bookmark | Recommend this book | Back to the book page | My bookshelf | Mobile Reading

Free Web Novel,Novel online - All in oicq.net -> Romance -> take off my aviation age

Chapter 1018 This is how the B2 air inlet is made

Previous page        Return to Catalog        Next page

    "Let's go!"

    As soon as Zhuang Jianye finished speaking, before Lao Wei could express his position, the head of the headquarters nodded first and then walked towards the optoelectronics research center deep in the factory.

    Lao Wei immediately followed. Only Lao Mou looked at the "sniper" pilot helmet in his hand and at the same time looked at the rather modern Z-12 helicopter cockpit. He had a depressed look on his face. It was obviously him who was trying out the "sniper" helmet.  Yes, how come after all this, the big guys went to visit the equipment?

    Thinking about it, it seems that he was the one who initiated the discussion about the weight of the helmet, and Lao Mou just wanted to give himself a second thought. Isn¡¯t the stable experience bad?  What are you doing!

    But Lao Mou just thought about this matter in his mind. Seeing that the head of the headquarters was about to disappear, Lao Mou could only grit his teeth and reluctantly gave the "sniper" helmet to the pilot, and said:  "I'll come over and see how it looks when I get a chance."

    Then he strode forward and chased after the head of the headquarters and others.

    "Compared with Lao Mou's reluctance, Lao Wei seemed impatient. You must know that it is the core manufacturing equipment that has the opportunity to stabilize aerospace hegemony.

    How can Americans make all kinds of fiber composite materials fly so fast that their own aircraft and spacecraft are put to death by one generation and one generation? As a result, Europe, Russia and other countries can only watch the United States.  The figure behind him sighed, feeling like his body was being hollowed out.

    Americans have automatic filament laying machines, which can maximize the utilization rate of fiber composite materials. Not to mention other things, the proportion of composite materials in the next-generation wide-body trunkliner announced by Boeing is as high as 40%. It is expected that in the 21st century  Be operational within the first ten years.

    Seeing this, countries all over the world are amazed, envious, and at the same time have a deep sense of powerlessness.

    The amount of composite materials used in civilian passenger aircraft in the United States must reach 40%, while most countries in the world are still arguing over whether to use 10% or 8% composite materials in fighter jets. The gap between the United States and other countries in the world is so wide.  , otherwise how could there be the title of hegemony.

    As a result, Ascendas Group actually achieved a breakthrough with key equipment that was monopolized by Americans and given hegemonic connotations. This made Lao Wei, who was engaged in such research, calm down.

    That is to say, the head of the headquarters took the lead and sat in front. Old Wei had no choice. Otherwise, if someone were replaced, Old Wei would rush over in three steps and two steps at a time, pull the opponent away, and rush directly into the research center.

    Despite this, Lao Wei continued to popularize the common sense of automatic laying machines behind the head of the headquarters, repeatedly saying how important this thing is to the development of domestic aerospace. The overall meaning is obvious, you should hurry up.  If it is slow, what should I do if the automatic laying machine runs away?

    Facts have proved that the Ascendas Group's automatic wire laying machine is not a little goblin with legs running around. It is parked quietly in the helmet process preparation room on the third floor of the Optoelectronics Research Center, serving as a key production equipment.  Provide the production of lightweight composite helmets and customized rapid processing for the Optoelectronics Research Center to further research and improve the integrated display system of the "Sniper" pilot helmet.

    Therefore, the entire equipment is not large, with a length of only 3 meters and a height of 2.7 meters. It consists of only three parts, a robotic arm with 6 degrees of freedom of movement, a mold holder and a console.

    From the outside, it doesn¡¯t look outstanding. It¡¯s just a robotic arm. It¡¯s not as impressive as producing extra-large parts that are more than ten meters long for large passenger aircraft, nor is it as cool as matching a sensitive part of a high-end fighter jet.

    "Staying there so ordinary does not seem to have anything to do with the expected aerospace hegemony.

    ¡°This is the nb-2500v automatic laying machine delivered to the Optoelectronics Research Center by Tengfei Group Special Equipment Co., Ltd"

    Just when the head of the headquarters, Lao Wei and other military bosses looked at the equipment in front of them and frowned, feeling that the so-called aerospace hegemony seemed to be a bit bigger than imagined, Zhuang Jianye quickly came to nb-2500v.  Before, I started to introduce everything in detail.

    What kind of yarn laying head, what number of yarn bundles, how much labor is saved, and how much the scrap rate is reduced. In short, Zhuang Jianye is confused by all kinds of data.

    Hearing that the head of the headquarters and others were feeling dizzy, seeing that Zhuang Jianye had no intention of stopping, the head of the headquarters, whose brain was already aching from being tormented by so many incomprehensible numbers, was about to speak to stop Zhuang Jianye's tirade.  As soon as he reached his mouth, he heard Zhuang Jianye directing the operator of the equipment: "Open the equipment and show the working conditions of the nb-2500v to the leaders."

    "OK!"

    The operator nodded and prepared to start the equipment, but before pressing the switch, the operator raised his head and asked a little embarrassedly: "Mr. Zhuang, which product do we produce better?"

    "Just do itThe simplest one, 0516b artifact!  "Zhuang Jianye blurted out without thinking.

    "Okay, no problem!" The operator pressed the switch without hesitation, and immediately entered the processing instructions for the 0516b workpiece on the console. After pressing the confirmation button, the mold holder started first, and the grinding tool rack next to it started.  Find an S-shaped grinding tool on the Internet. After the fixation is completed, the self-test usually turns it up and down twice, and then stabilizes.

    At the same time, the robotic arm reached out, walked slowly on the surface of the mold, and then quickly moved to the middle. The complex fiber laying head at the top of the robotic arm was close to the mold. The next moment, there were 8 fiber bundles with a width of 6.4 mm, like  A 75mm wide ribbon is sprayed out from the silk laying head like a spring silkworm, and combined with the epoxy resin that is quantitatively infected at the same time, it is evenly applied to the abrasive tool.

    Walking like this to the S-shaped complex curved surface, the originally fixed mold bracket slowly shifted, forming a comfortable feed angle with the moving wire laying head. The t800 carbon fiber yarn was as smooth as silk, moving from the complex S-shaped surface.  The curved surface is skipped stably and evenly.

    In this way, with the cooperation of the mechanical arm and the bracket at various angles, the silk laying head is like a painter or a weaver, sometimes moving forward, sometimes retreating, sometimes rising, and sometimes deflecting sideways on the mold.

    It seems chaotic, but in fact, the entire 0516b artifact gradually reveals its true appearance in this chaos.

    The rest of the people just looked at it. They looked at the black and sticky things on it, and they couldn't help but get goosebumps on their bodies. Let alone being able to tell what it was, even if there were no goosebumps, these people couldn't figure it out.  What exactly is the type 0516b artifact?

    Because they really can¡¯t think of any aircraft or spacecraft that would use such an unusual S-shaped tube.

    "However, others are confused. The moment Lao Wei, who specializes in aerospace application research, selected the mold for nb-2500v, his eyes immediately widened as if he saw his beautiful first girlfriend.

    When the first layer of t800 carbon fiber was laid and ready to be laid for the second layer, Lao Wei¡¯s old face became flushed like the ageless goddess racing for the first time.

    When nb-2500v was about to lay the third layer, Lao Wei, who seemed to be a dead tree, finally couldn't help it anymore, pointed at the 0516b workpiece being processed and exclaimed excitedly: "Everyone, this is how the American B2 air intake is made.  Yes, that¡¯s how the air intake of their stealth bomber is made!¡±

    If you like Soar My Aviation Age, please collect it: Soar My Aviation Age is updated the fastest.  (Remember the website address: www.hlnovel.com
Didn't finish reading? Add this book to your favoritesI'm a member and bookmarked this chapterCopy the address of this book and recommend it to your friends for pointsChapter error? Click here to report