He Ming and other veteran cadres are obviously aware of Zhuang Jianye's various troubles, but his current mentality is similar to that of Factory Director Yu, neither supporting nor opposing.
¡°It would be best if they could rely on their relationship to open orders for military products. If not, Zhuang Jianye would not be surprised. After all, their TY-1 is not yet on the market in the eyes of the mainstream aviation industry.
As for returning to the list of key military security personnel, Zhuang Jianye supports it with both hands, but that¡¯s all. The real factory management has an ambiguous attitude. No matter how powerful some old guys are, what tricks can they do?
In the end, the ministries and the army do not depend on the attitude of the factory leadership. If Director Yu is not determined to do it, it will be useless for everyone. The people above are not fools. Hongchang is the above-mentioned son?
Therefore, Zhuang Jianye's attitude towards veteran cadres like He Ming is to support them when they need it, shout slogans when they need it, give it generously if they want sponsorship, and then turn around and do whatever they need to do. In a word, it can't be done for the sake of feelings. Hungry.
Because of this, after Zhuang Jianye provided a ty-1 as a sample, he was busy expanding the aircraft production workshop of No. 23 Factory.
This is the most difficult problem in the factory today.
Fortunately, due to Huancheng City¡¯s efforts, the reorganization of the two electric fan factories went very smoothly. There was no obstacle to the management of the 23rd Factory, and the electric fan business was completely transferred to the other three electric fan factories.
So No. 23 Factory began to renovate the original electric fan production workshop on a large scale, adding equipment, hoarding raw materials, and refining the production process.
"Everything is a big deal. If Zhuang Jianye still thinks about him, he will really become a god."
¡°We have obtained six sets of equipment from the Ninth Branch Factory and are in contact with the Second Branch Factory. Director Xue thinks the price is a bit low and does not agree.¡±
In the afternoon, the equipment obtained from Yonghong Factory began to be installed. Zhuang Jianye, who had been busy all morning and finally took a break, immediately got up from the sofa in the office and went to the workshop. Wang Heping, who was directing the dispatching, immediately came over and took the current equipment. Report the situation.
Due to the expansion of the drone production workshop, the current Twenty-three Factory has suspended the refrigeration component production workshop. The purpose is to reprogram the machines equipped with sequence controllers and simple CNC equipment in the workshop so that these machines can It is suitable for the processing and production of various parts of ty-1 drone.
Yes, the drone production workshop of No. 23 Factory is the original refrigeration equipment production workshop. The reason for this is very simple, because the equipment in this workshop has been fully automated, and some equipment has realized simple CNC. Special equipment for aviation manufacturing such as friction welding machines and impeller shot peening machines are ideal places for drone production in every aspect.
The only troublesome thing is that the programming and debugging of sequence controllers and simple CNC are a bit complicated. They need to be reprogrammed along with the production process and adjustments. Unlike real CNC machine tools, the program can be flexibly changed at any time according to changes in components without Extra time is needed for additional programming.
If this was done in other factories, it would have to stop for ten days and a half at least, and then spend a lot of money to hire professional programming technicians to do it. However, Factory 23 does not have to be so troublesome. Peng Chuan had already done it a few months ago. When Qian Lin Guanghua developed TY-1, he began to formulate process production plans and programming plans based on Zhuang Jianye's requirements and the equipment in the refrigeration component production workshop.
After several months of careful research and testing, Peng Chuan not only made the plan extremely mature, but it is definitely the most suitable for the current situation of the 23rd factory. More importantly, it is very cost-effective in terms of time. It only takes three days to complete the project. The original refrigeration parts workshop has been completely transformed into an aviation manufacturing workshop capable of producing drones.
There is no need to replace the worker team. The original workers who produce refrigeration components can be fully competent in the production of drones after a little adaptation to the new process.
As for the original refrigeration components business, it was transferred to the original electric fan production workshop. The equipment was purchased from other branches of the Yonghong Factory. The apprentices trained in the past two years were then matched with the masters hired by the Yonghong Factory at a high price to adapt. production, and at the same time continue to carry out production line automation and numerical control transformation.
I believe that when the refrigeration equipment inventory accumulated in the 23rd factory is used up, the new refrigeration parts production workshop should be able to barely meet the market demand, even if it cannot reach the previous production capacity.
While thinking about the plan in his mind, Zhuang Jianye nodded: "It's really difficult to deal with Factory Director Xue. He is a veteran of Yonghong Factory. Most people really can't do anything about it. Leave this matter to me. I'll follow you tonight." My old man told me that his old subordinates should be dealt with by my old man"
¡°Laozhuang, Laozhuang~~¡±
Zhuang Jianye is still talking hereAs for the matter, Peng Chuan came over over there with a stack of blueprints.
Then he started to complain very rudely: "Is the impeller shot peening machine going to be used so soon? I said, Lao Zhuang, can't you understand our difficulties?
You want precision, and we will control the precision for you at 26 lines. If you want the impeller to be more powerful, we worked hard to repeatedly modify the shape of the impeller, and finally met the requirements. You said you want CNC, okay, exhausted. We also do the work, but if you can¡¯t do it, you have to use it for production now? If the thing is still unstable, just take it over. If something goes wrong, it¡¯s who¡¯s fault"
"You have to you have to you have to tell me, how much more money do you need?" Zhuang Jianye quickly put an end to Peng Chuan's complaint, wiped the saliva from his face, and said it bluntly, there is nothing he can do about it, as long as this guy complains, he will be in trouble. Good thing, there is no other way except to spend money to stop it.
"Give me another 100,000 yuan. I'll give you the semi-finished products I've saved first. The new ones will have to wait for a while." Peng Chuan pushed up the glasses on the bridge of his nose and said the number in a very polite manner.
Zhuang Jianye's face turned green immediately. He poured more than 200,000 yuan into a CNC impeller shot peening machine, and asked for another 100,000 yuan. Now, this is 1984, and more than 300,000 yuan can buy a machine with the same weight in gold. .
When Peng Chuan saw Zhuang Jianye¡¯s face, his gentle face immediately became like Huang Shiren¡¯s: ¡°Don¡¯t bargain, you can¡¯t lose even a penny, and I¡¯m telling you, this 100,000 yuan may not be enough.
Do you think it¡¯s that easy to use computer technology to control impeller components to accurately process complex shapes of aerospace components? A floppy disk costs several hundred yuan. In order to find the best solution, we use seven or eight at a time.
¡°This is still a drone. If you change to another model, you¡¯ll have to wait until it¡¯s redone"
"Okay, okay, you are the uncle, I will give you one hundred thousand, and you will go to the finance department to report the accounts tomorrow."
Seeing that Peng Chuan was about to start complaining again, Zhuang Jianye started to have a headache again. If the CNC impeller shot peening machine was easy to use, it would not be a restricted area for large aviation groups such as Boeing and McDonnell Douglas. If he wanted to build airplanes in the future, Going further, this step has to be taken, so investment is essential. One hundred thousand is one hundred thousand, here it is.
If you like Soar My Aviation Age, please collect it: Soar My Aviation Age is updated the fastest. (Remember the website address: www.hlnovel.com