Add Bookmark | Recommend this book | Back to the book page | My bookshelf | Mobile Reading

Free Web Novel,Novel online - All in oicq.net -> Historic -> Anti-Japanese military industry is king

Chapter 1615: Disassembled into parts

Previous page        Return to Catalog        Next page

    Lao Yang walked into the workshop.  At this moment in the workshop, many people were looking at him.  Many people know that many little devils came today, and the big guys have to work overtime. Unexpectedly, Lao Yang was called away again.  This thing is too strange.  Will it be dangerous for Lao Yang to go this time?  Now that Lao Yang came back, the big guy let go of a stone in his heart.

    "The imperial army has given us an important task. Within a week, let us produce 160 first-class anti-aircraft gun barrels and assemble 80 sets of anti-aircraft guns." Lao Yang said to everyone.

    Hearing this, everyone immediately exploded: "How is this possible?"

    In fact, everyone knows in their hearts that since the arrival of the devils, they have been passive and sabotage. They always make mistakes in production, and the yield rate is very low.  If you work hard, it is still possible to complete the task.  However, everyone is unwilling.

    Now the little devils are serious, if they can't complete the task, they will all be shot.  If the thinking is clear, you can know that if you complete the task, the consequences will be more serious.  The little devil should think about it, in the past.  Why can't it be produced?  Now they have to be shot to produce it?  In the past, these people must have not done their best!  In this way, the little devil has even more reason to kill to vent his anger.  That's why Lao Yang put forward this reason: it's not that everyone doesn't try their best, it's that these machines are not good enough.  So it has to be disassembled and readjusted.

    "If we want to complete the production, we have to disassemble our machinery and equipment first. Only after adjustments can we improve the quality and quantity of production." Lao Yang said: "It is not too late, let's do it! We can't finish it  Mission, the imperial army will shoot people."

    Hearing Lao Yang's words, everyone was a little dazed at this time.  The quantity and quality of the production are only poor, not because of the poor precision of the machinery and equipment, but because of their passive sabotage.  They have technology at hand, but no one is willing to really display their technology.  Now Lao Yang says he wants to dismantle the machinery and equipment, what is going on?

    But now Lao Yang didn't give them a chance to explain, so he went up and started dismantling the machinery and equipment.

    The principle of making this small-caliber anti-aircraft gun is actually very similar to that of making a rifle.  Take the gun barrel as an example, you need to use a long piece of gun steel and dig a hole in the middle of it.  In this way, the blank of the gun barrel is made, and then various deep processing is carried out.  It's just that the barrel of the anti-aircraft gun bears a higher chamber pressure, so the gun steel required is of higher quality, and the drilling time is slower.  At the same time, the barrel length-to-diameter ratio of anti-aircraft guns is very large.  A 25mm anti-aircraft gun is 1.5 meters long.  Calculated in this way, the aspect ratio is almost 60 or so.  And normal artillery does not have such a high aspect ratio.  For example, howitzers have an aspect ratio of about ten to twenty.  The aspect ratio reflects the slenderness of a gun barrel. Thick and short barrels are easy to process, but thin and long barrels are of course difficult to process and require high precision.

    Therefore, the drilling machine that specializes in manufacturing gun barrels is the most important production equipment in the entire anti-aircraft production.  The drill bit of this drilling machine is two meters long and can directly complete the drilling work.  It's just that if you want to drill through it easily, and if you want to ensure the accuracy in the drilling process, then there are certain technical requirements.  It depends on the craftsmanship of the master craftsman.

    Every time this drill is installed, it is very particular.  A slight error means that all the products produced are waste products.  Now, with a special tool, Lao Yang removed the drill bit, and then removed the base that fixed the gun steel.

    Although everyone didn't know what happened.  But since Lao Yang said that he wanted to disassemble the equipment here, let's do it, anyway, they have to work.

    Soon, in the factory, the big guys started working in full swing, and the machines and equipment were quickly disassembled into parts.  Lao Yang worked very hard, so everyone followed him and worked hard together.  This is the first time they have done so neatly since the little devils took over here.

    Time passed little by little like this.  Lao Yang is taking apart the electric motor below.  At this moment, a voice sounded beside him: "It's just to adjust the precision of the machine, why do you have to dismantle it completely?"

    The one who spoke was an engineer of the devil.  Of course, such a large factory cannot be run by Chinese only.  The little devil will send some people in charge to take an overview of the overall situation, and at the same time send some technicians.  It's just that the technicians sent by the little devil also have two knives.  Those excellent technicians are all in the little devil's local factory. The local military factory has a tight production task, so how could it be possible to send excellent technicians here.

    When Tomomura Mimura was slapping his ears just now, these technicians were all slapped in the face.  But Tomomura Mimura also knew their true level, so he asked the specific reason.When ??, I did not ask these people, but asked the Chinese people at the scene.

    ? These people are not very skilled, so it is hard to see that the Chinese are passively slowing down their work here.  But in normal times, they are aloof in the workshop.

    Beside the Devil technician, Wang Shugui was still following.  Now it is a major event related to his own destiny, so Wang Shugui didn't go back to sleep steadily, but came here to supervise.

    "Of course the motor has to be removed. Since we want to adjust it, we need a full adjustment. The motor should also be disassembled and oiled. We must ensure the most suitable operation of the machine. The vibration of the motor is small, and we are drilling the gun barrel.  time, it can be more accurate."

    After Wang Shugui finished speaking, his eyes showed disdain, and he glanced at him. While working, he continued: "If you have time, you can disassemble the machine together. If you don't, then don't come  Interfere with us too much. This will waste our time. After a week, if there are not so many barrels produced, Da Taijun will kill people."

    When he said this, the technical staff of the little devil had nothing to say.  Of course, the other party would not work with him, that would be too cheap.  But he didn't dare to command anything anymore, and could only watch helplessly as all the equipment in the workshop was disassembled into parts.

    Does the steel base also need to be disassembled?  No vibrating parts?  The devil's technicians opened their eyes wide, thinking rapidly in their minds, and really wanted to go up and ask, but in the end, they held back.

    At this time, they stopped making trouble.

    When Dongfang started to turn pale, almost all the equipment in the workshop was dismantled, and the weight of each piece was almost less than 100 catties.  (Remember the site URL: www.hlnovel.com
Didn't finish reading? Add this book to your favoritesI'm a member and bookmarked this chapterCopy the address of this book and recommend it to your friends for pointsChapter error? Click here to report